
Asked by: Nadka Nisius
asked in category: General Last Updated: 6th March, 2020How do you lift the top of a stove?
To begin, slide the top back on the stove or remove your support and gently bring it down. Press down to confirm that the spring clips have reattached and the lift top is securely locked into place. Next, align the holes in the top with the burner tubes. Then, if applicable, screw them firmly into place.
Also know, how do you lift the top of a Hotpoint stove?
How to Lift the Lid of a Hotpoint Oven
- Remove the grates from the top of the stove.
- Place your thumbs in front of the stove in the groove between the top and the main oven body.
- Lift the top straight up until it is fully open, but do not push it beyond its limit.
- Place the holding rod underneath the top to hold it up while you work.
Secondly, how do you lift the top of a Maytag stove? How to Remove a Maytag Range Top for Repairs
- Disconnect the power to the Maytag range.
- Open the oven the door.
- Remove the mounting screws with a ΒΌ-inch socket wrench.
- Grasp the top firmly with both hands, one on each side.
- Locate the wiring connector located between the top and the rear panel.
- Grab the Maytag range top with both hands.
Moreover, can you lift the top of a glass top stove?
Locate the screws holding the glass surface to its base on the front of the cooktop. If your cooktop is attached to an oven, you will need to open the oven door to reach the screws. Remove both screws with a screwdriver. Slightly lift and pull the glass surface toward you as you stand in front of the appliance.
How do you remove the top of a GE gas stove?
Removing a GE Profile Stove Top
- Turn off the range breaker in your home’s service panel.
- Open the oven door, then remove the screws from the underside of the front of the main top, which are protected when the door is closed.
- Close the oven door, then lift the main top.
20 Related Question Answers Found